Presentation Outside Calls - Cisco TelePresence SX20 User Manual

40
Share content

Presentation Outside Calls

Connect your source(s) and make
sure it is switched on and tap Share.
Tap again to stop displaying the corresponding source, as
shown.
Tap the source avatar to display this source on you video
system's display. For a dual screen system tap another
source avatar (if applicable) to display that one as well.
About Local Sharing
You may show content on the
system's screen(s), even if the
system is not in a call.
What you then do is to utilize the
Preview function (see also "Start and
Stop Presentation in a Call" on page
38).
On video systems with dual screens
you may share contents from two
independent sources simultaneously.
This can be done outside calls only.
The option is not available in a call.
At left we use the dual display as
example, but the principle applies to
single screen systems as well.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.