Move The Selfview Pip - Cisco TelePresence SX20 User Manual

60
Camera

Move the Selfview PiP

Tap Selfview in the upper right
part of the screen to invoke the
selfview, if needed.
Once you reach the
location you want to
have it in, lift your finger
from the touchscreen.
Press and hold your
finger within the selfview
area.
The selfview will now assume
its new location.
As soon as it turns
blue drag the selfview
to the new location.
Possible locations are
indicated.
Why Move the Selfview?
The Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the Selfview activated during
the meeting. This could, for example,
be to ensure that a lecturer in your
room remains seen on the screen
despite constantly moving around.
It may happen that the current
position of the Selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.