Iec 61580 Goose Analog Values; Transducer Inputs And Outputs - GE B30 UR Series Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 IEC 61850
 GOOSE ANALOGS
MESSAGE
MESSAGE
MESSAGE
The B30 Bus Differential System is provided with optional IEC 61850 communications capability. This fea-
ture is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2 for
additional details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.

PATH: ACTUAL VALUES METERING
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.

PATH: ACTUAL VALUES METERING
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin

IEC 61850 GOOSE ANALOGS
ANALOG INPUT 1
0.000
ANALOG INPUT 2
0.000
ANALOG INPUT 3
0.000
↓
ANALOG INPUT 32
0.000

TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA

TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
B30 Bus Differential System

6.3.6 IEC 61580 GOOSE ANALOG VALUES

6.3.7 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6.3 METERING
6
6-17