Accessories Required But Not Supplied; Databases; Gps Antenna Splitter; Table 1-18 Temperature Probe - Honeywell KMH 880 Installation Manual

B

1.6.3 Databases

PART NUMBER
071- 00167-0101
071-00167-0102
071-00167-0103
1.7

ACCESSORIES REQUIRED BUT NOT SUPPLIED

1.7.1 Temperature Probe
The EGPWS is capable of interfacing directly to a standard 500 ohm temperature
probe for aircraft operated in cold environments. Very cold air temperatures cause
an increase in the density of the air mass and can result in barometric altimeter
errors, both in sensitive altimeters/encoders and blind encoders. Aircraft normally
operated in very cold climates can benefit from the addition of an OAT probe inter-
faced to the EGPWS
SYMBOL
Table 1-18 Temperature Probe P/N 050-03610-0002
The EGPWS Processor does not require a Temperature Probe input if a Digital Air
Data Computer, with an OAT Label present on the bus, is available as an interface.

1.7.2 GPS Antenna Splitter

To have the flexibility of using an existing KA 92 GPS Antenna, Honeywell offers a
splitter that will greatly simplify the installation procedure. One of the split ports is
DC blocked from the common port so that equipment voltage regulators do not
conflict.
Rev 3, August/2002
DESCRIPTION
America's Database
Atlantic Database
Pacific Database
Table 1-17 KMH 880 Databases
PART NUMBER
137-00042-0001 OAT Probe
MS3106E12S-3S OAT Probe Connector
090-01034-0001 OAT Probe Mounting Kit
010-00068-0016 Crimp Terminal
NOTE
10609I03.CDL
[EA]
[EA]
[EA]
DESCRIPTION
KMH 880/KTA 870
[UOM]
[UOM] -0001
[EA] 1
[EA] 1
[EA] 1
[EA] 1
Page 1-16