Input/Output Discrete Type Select; Audio Menu Select - Honeywell KMH 880 Installation Manual

B
4.2.3.8.5 Category 5, Input/Output Discrete Type Select
The following table provides identification of the Input/Output Discrete Type.
ID Input/Output
Discrete Type
0 0
If a single cockpit lamp is desired for Terrain Cautions and Warnings, J10-116
and J10-117 can be diode or'ed together to drive one lamp.
4.2.3.8.6 Category 6, Audio Menu Select
The following table provides identification of the Voice Menu type.
ID AUDIO MENU TYPE
0
1
If Category 1 selected ID #0 (TSO-C151a Class B curve set) Category 6 ID #1
(Alternate) must be selected to be in compliance with the TSO.
4.2.3.8.7 Category 7, Audio Output Level
The following provides identification of the Audio Output Level type. Each entry
in the ID column corresponds to a particular nominal alert output level selec-
tion (max,-6dB, -12 dB, -18dB AND -24Db). The Nominal "Max" Output is 100
mW/rms for the 600 ohm output. The output power level will be the nominal
maximum output 100mW reduced by the selected volume type.
Rev 3, August/2002
Basic input/output discretes (Lamp Format: Type 2)
Table 4-6 Input/Output Discrete Type Select
NOTE
0 Basic
1 Alternate
Table 4-7 Audio Menu Select
NOTE
10609I03 CDL
Description
DESCRIPTION
KMH 880/KTA 870
Effectivity
App. Cfg.
-001 -001
EFFECTIVITY
App. Cfg.
-001 -001
-001 -001
Page 4-11