Table of Contents
Advertisement
B
The 2 nm range ring is visible on all TAS RANGE selections between 2.5 and 20
nm.
Set TAS RANGE switch to 2.5 nautical miles. The following
properly scaled range rings should be visible:
2 and 2.5 nautical mile range rings.
Set TAS RANGE switch to 5 nautical miles. The following
properly scaled range rings should be visible:
2 and 5 nautical mile range rings.
Set TAS RANGE switch to 7 nautical miles. The following properly
scaled range rings should be visible:
2 and 7 nautical mile range rings.
Set TAS RANGE switch to 10 nautical miles. The following
properly scaled range rings should be visible:
2 and 10 nautical mile range rings.
Set TAS RANGE switch to 15 nautical miles. The following
properly scaled range rings should be visible:
2 and 15 nautical mile range rings.
Set TAS RANGE switch to 20 nautical miles. The following
properly scaled range rings should be visible:
2 and 20 nautical mile range rings.
Set TAS RANGE switch to 40 nautical miles. The following
properly scaled range rings should be visible:
40 nautical mile range ring only.
On the traffic display unit, an outer ring represents maximum nautical (nm) dis-
play scaling as selected on the RANGE switch.
Rev 3, August/2002
NOTE
NOTE
10609I03 CDL
KMH 880/KTA 870
______
______
______
______
______
______
______
Page 4-27
Advertisement
Table of Contents
