Table of Contents
Advertisement
B
7.1 View Strap Data
This option allows the user to view the current strap settings in an easy to read lay-
out. The TAS unit sends the data to the "Main Diagnostic Window" ( see Figure 4).
For new installations of Equipment or the Configuration Module,
use the "Initialize Config Mod" option (see
7.6).
7.2 Modify Strap Data
The strap data is read from the TAS unit and displayed in a dialog box ( see
5). The dialog box has two pages, Strap Page 1 and Strap Page 2. Click on the top
of each page to view/modify the different straps. The user may modify any of the
straps by selecting the desired configuration.
Rev 3, August/2002
Figure 4 View Strap Data Window
NOTE
10609I03.CDL
KMH 880/KTA 870
Appendix D, Section
Figure
D-11
Advertisement
Table of Contents
