Draytek VIGOR2925 SERIES User Manual page 531

Hide thumbs Also See for VIGOR2925 SERIES:

Table of Contents

Confirm Password

Before you click OK, you have to insert a USB storage disk into the USB interface of the

Vigor router. Otherwise, you cannot save the configuration.

Note: "Admin" could not be typed here as username, for

the word is specified for accessing into web pages of Vigor

router only. Also, it is reserved for FTP firmware upgrade

Note: FTP Passive mode is not supported by Vigor Router.

Please disable the mode on the FTP client.

Type the password for FTP/ SMB users for accessing FTP

server. Later, you can open FTP client software and type

the password specified here for accessing into USB storage

disk. The length of the password is limited to 11 characters.

Type the password again to make confirmation.

It determines the folder for the client to access into.

The user can enter a directory name in this field. Then, after

clicking OK, the router will create the specific/new folder

in the USB storage disk. In addition, if the user types "/"

here, he/she can access into all of the disk folders and files

in USB storage disk.

Note: When write protect status for the USB storage disk is

ON, you cannot type any new folder name in this field.

Only "/" can be used in such case.

You can click

to open the following dialog to add any

new folder which can be specified as the Home Folder.

It determines the authority for such profile. Any user, who

uses such profile for accessing into USB storage disk, must

follow the rule specified here.

File – Check the items (Read, Write and Delete) for such

Directory –Check the items (List, Create and Remove) for

such profile.

Vigor2925 Series User's Guide