Draytek VIGOR2925 SERIES User Manual page 209

Below shows an example for successful IPv6 connection based on PPP mode.
Note: At present, the IPv6 prefix can be acquired via the PPPoE mode connection which
is available for the areas such as Taiwan (hinet), the Netherlands, Australia and UK.
D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account ) before you try to use TSPC for network
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6 prefix
from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Always On - The network based on IPv6 will be kept
connected.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address or hostname for pinging.

Ping IP/Hostname – Type the IP address/host name in
such field.

TTL (Time to Live) – Set TTL value of PING operation.
v 6 – T S P C i n W A N
v 6 – T S P C i n W A N
193
1 / W A N 2 / W A N 3 / W A
1 / W A N 2 / W A N 3 / W
Vigor2925 Series User's Guide
N 4
A N 4