Station Control - Draytek VIGOR2925 SERIES User Manual

WMM Capable
APSD Capable
Rate Adaptation
Algorithm
Fragment Length
(256 – 2346)
RTS Threshold (1 – 2347)
After finishing all the settings here, please click OK to save the configuration.
4 . 1 8 . 8 S t a t i o n
4 . 1 8 . 8 S t a t i o n
Station Control is used to specify the duration for the wireless client to connect and reconnect
Vigor router. If such function is not enabled, the wireless client can connect Vigor router until
the router shuts down.
Such feature is especially useful for free Wi-Fi service. For example, a coffee shop offers free
Wi-Fi service for its guests for one hour every day. Then, the connection time can be set as "1
hour" and reconnection time can be set as "1 day". Thus, the guest can finish his job within
one hour and will not occupy the wireless network for a long time.
Note: Up to 300 Wireless Station records are supported by Vigor router.
Available settings are explained as follows:
Item
SSID
Enable
Connection Time /
Reconnection Time
Vigor2925 Series User's Guide
To apply WMM parameters for wireless data transmission,
please click the Enable radio button.
The default setting is Disable.
Wireless transmission rate is adapted dynamically. Usually,
performance of "new" algorithm is better than "old".
Set the Fragment threshold. Do not modify default value if
you don't know what it is, default value is 2346.
Minimize the collision (unit is bytes) between hidden
stations to improve wireless performance.
Set the RTS threshold. Do not modify default value if you
don't know what it is, default value is 2347.
C o n t r o l
C o n t r o l
Description
Display the SSID that the wireless station will use it to
connect with Vigor router.
Check the box to enable the station control function.
Use the drop down list to choose the duration for the wireless
client connecting /reconnecting to Vigor router. Or, type the
duration manually when you choose User defined.
496