Draytek VIGOR2925 SERIES User Manual page 191

Access Mode for USB,
Access Mode for LTE (for L model only),
Available settings are explained as follows:
Item
Index
Display Name
Physical Mode
Access Mode
Details Page
IPv6
Description
Display the WAN interface.
It shows the name of the WAN1/WAN2/WAN3 or
LTE/WAN4 that entered in general setup.
It shows the physical connection for WAN1/WAN2
(Ethernet) /WAN3 or LTE /WAN4 (USB) according to the
real network connection.
Use the drop down list to choose a proper access mode.
Then, click Details Page for accessing the settings page to
configure the settings.
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN
interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
175
Vigor2925 Series User's Guide