Draytek VIGOR2925 SERIES User Manual page 310

Log
Pop Browser Tracking
Window
Authentication
Landing Page
Index (1-15) in
Schedule Setup
Vigor2925 Series User's Guide
Time of login/log out, block/unblock for the user(s) can be sent
to and displayed in Syslog. Please choose any one of the log
items to take down relational records for the user(s).
If such function is enabled, a pop up window will be displayed
on the screen with time remaining for connection if Idle Timeout
is set. However, the system will update the time periodically to
keep the connection always on. Thus, Idle Timeout will not
interrupt the network connection.
Any user (from LAN side or WLAN side) tries to connect to
Internet via Vigor router must be authenticated by the router
first. There are three ways offered by the router for the user to
choose for authentication.
Web – If it is selected, the user can type the URL of the router
from any browser. Then, a login window will be popped up and
ask the user to type the user name and password for
authentication. If succeed, a Welcome Message (configured in
User Management >> General Setup) will be displayed. After
authentication, the destination URL (if requested by the user)
will be guided automatically by the router.
Alert Tool – If it is selected, the user can open Alert Tool and
type the user name and password for authentication. A window
with remaining time of connection for such user will be
displayed. Next, the user can access Internet through any
browser on Windows. Note that Alert Tool can be downloaded
from DrayTek web site.
Telnet – If it is selected, the user can use Telnet command to
perform the authentication job.
When a user tries to access into the web user interface of Vigor
router series with the user name and password specified in this
profile, he/she will be lead into the web page configured in
Landing Page field in User Management>>General Setup.
Check this box to enable such function.
You can type in four sets of time schedule for your request. All
the schedules can be set previously in Application >> Schedule
web page and you can use the number that you have set in that
web page.
294