9.
If the worker has connected to the headquarter using host to host VPN tunnel, he may set
up an index for it. Enter the Class Name of Index 3. In this index, he will set reserved
bandwidth for 1 VPN tunnel.
10. Click Edit for Class 3 to open a new window. In this index, the user will set reserved
bandwidth for VPN.
11. Click Add to open the following window. Check the ACT box, first.
12. Then click Edit of Local Address to set a worker's subnet address. Click Edit of
Remote Address to set headquarter's IP address. Leave other fields and click OK.
Vigor2925 Series User's Guide
104