Draytek VIGOR2925 SERIES User Manual page 188

Hide thumbs Also See for VIGOR2925 SERIES:

Table of Contents

After finished the above settings, click OK to save the settings.

Vigor2925 Series User's Guide

packets sending by WAN interface.

Disable – Disable the function of VLAN with tag.

Tag value – Type the value as the VLAN ID number. The

range is from 0 to 4095.

Priority – Type the packet priority number for such VLAN.

The range is from 0 to 7.

Choose Always On to make the WAN connection be

activated always.

Load Balance: Check this box to enable auto load balance

function for such WAN interface.

When the data traffic is large, the WAN interface with the

function enabled will balance the data transmission

automatically among all of the WAN interfaces in

connection status.

If you choose Failover as the Active Mode, Active When

will appear. Please specify which WAN will be the Backup

Any of the selected WAN disconnect – Such backup WAN

will be activated when any master WAN interface

disconnects.

All of the selected WAN disconnect – Such backup WAN

will be activated only when all master WAN interfaces