Draytek VIGOR2925 SERIES User Manual page 260

Hide thumbs Also See for VIGOR2925 SERIES:

Table of Contents

Advance Mode

To use Wizard Mode, simple do the following steps:

1. Click the Wizard Mode radio button.

2. Click any Index number link (e.g., 2 in this case). The setting page will appear as follows:

Available settings are explained as follows:

Destination IP

3. Click Next to get the following page.

Vigor2925 Series User's Guide

Allow to configure frequently used settings of route policy

via three setting pages

Allow to configure detailed settings of route policy.

Any – Any IP can be treated as the source IP.

Src IP Start - Type the source IP start for the specified

WAN interface.

Src IP End - Type the source IP end for the specified

WAN interface. If this field is blank, it means that all the

source IPs inside the LAN will be passed through the WAN

Any – Any IP can be treated as the destination IP.

Dest IP Start- Type the destination IP start for the

specified WAN interface.

Dest IP End - Type the destination IP end for the specified

WAN interface. If this field is blank, it means that all the

destination IPs will be passed through the WAN interface.