Draytek VIGOR2925 SERIES User Manual page 20

WAN2
LAN1~LAN5
(for Vigor2925)
LAN1~LAN4
(for Vigor2925F)
Interface
Factory Reset
USB1~USB2
WAN1
(for Vigor2925F)
WAN1~WAN2
Vigor2925 Series User's Guide
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
Switch on Rear Side
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connector for a USB device (for 3G/4G USB Modem or printer or
Environmental Thermometer).
Fiber connection (100Mbps) for accessing the Internet.
Connecter for local network devices or modem for accessing Internet.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
(For Vigor2925L only)
4