Hitachi Compute Blade 2000 User Manual page 146

# Item
4 Chassis Information
 Power and LEDs
This screen shows the power and LED status of a server blade. You can control the
power state and reset the server blade on this screen.
# Item
1 Refresh
2 Power Status
3 Power-on
4 Force Power-off
5 Hard Reset
6 NMI
Description
Slot Number shows the slot number of the slot
where the server blade is inserted.
Chassis ID shows the chassis ID set in the
management module.
Description
Reloads the information.
Shows the current power state of the server
blade.
OFF: The power of the server blade is off.
ON: The power of the server blade is on.
OFF (Power-on is disabled): The power cannot
be turned on due to a power failure.
Turns on the power of the server blade.
Turns off the power of the server blade without
OS shutdown. You can do a shutdown on the
OS screen or use the SC function to turn off
the power.
Hardware resets the server blade. Enabled
when the server blade power is on.
Sets the operation mode of the memory
system.
Independent Channel Mode (default)
Mirrored Channel Mode
Lockstep Channel Mode
Spare Channel Mode
Note: Do not use Lockstep Channel Mode
because it is not supported.
Note: If Xeon 5500 is installed on the server
95