Remote Engine Starter Registration - Honda 08E91-E22-100B Installation Instructions Manual

62. Check that all wire harnesses are routed properly
and all connectors are plugged in.
63. Reinstall all removed parts. Check that all clips and
other fasteners are installed securely. Take care not
to pinch the airbag with a clip during reinstallation of
the front pillar trim. Do not push the front pillar trim
excessively.
64. Reconnect the negative cable to the battery. Check
that the electrical accessory and other electrical
systems function properly.
65. Perform "REMOTE ENGINE STARTER
REGISTRATION" and "FUNCTION CHECK".
66. Enter the customer's radio anti-theft code, and reset
the radio station presets.
67. Reset the clock.
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.

REMOTE ENGINE STARTER REGISTRATION

1. Acquire the PCM code from ISIS.
2. Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch to ON (II).
3. Start the HDS, and click the car icon.
4. Input the VIN and other required information into the
HDS, then click the check button.
Input the VIN and
other required
information.
AII 44399 (1008)
CAR ICON
CHECK BUTTON
17 of 21