Honda 08E91-E22-100B Installation Instructions Manual page 12

36. Route the engine starter harness 7-pin connectors
up the steering column and to the ignition switch.
Unplug the white vehicle 7-pin connector. Plug the
white engine starter harness 7-pin connectors in
between the vehicle 7-pin connectors.
ENGINE
STARTER
HARNESS
7-PIN
CONNECTOR
(White)
37. Unplug the brown vehicle 7-pin connector, and plug
the brown engine starter harness 7-pin connector
into the vehicle connector.
NOTICE
Check that the engine starter harness 7-pin
connector (brown) is securely connected to the
vehicle connector. A loose connector can cause the
engine to stall.
ENGINE STARTER
HARNESS 7-PIN
CONNECTOR (Brown)
Pull the connector and check
that it is locked securely.
12 of 21
IGNITION
SWITCH
VEHICLE 7-PIN
CONNECTOR
(White)
872628AT
VEHICLE 7-PIN
CONNECTOR
(Brown)
(Not reconnected.)
872629AT
AII 44399 (1008)
38. Disconnect the vehicle 8-pin connector on the rear of
the wiper switch and plug the engine starter harness
8-pin connector into the vehicle 8-pin connectors.
VEHICLE 8-PIN
CONNECTOR
39. Secure the 8-pin connector to the engine starter
harness with one wire tie.
CONNECTED 8-PIN
CONNECTOR
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
ENGINE STARTER
HARNESS
8-PIN CONNECTOR
WIPER
SWITCH
872630AT
WIRE
TIE
ENGINE
STARTER
HARNESS
WIPER
SWITCH
872631AT