Draytek vigor3900 User Manual page 85

Enable
Description
VLAN Tag
VLAN ID
Priority
Port
Default MAC
Address
MAC Address
IPv4 Protocol
IPv4 Mode
Vigor3900 Series User's Guide
Check this box to enable such profile.
Give the brief description for such profile.
Choose Enable to tag the packets passing through the port
specified below.
Type the VLAN ID number for such profile.
Type the packet priority number for such VLAN. The range
is from 0 to 7.
Choose the physical WAN interface for such profile.
Enable – Click it to enable the default MAC address for
such profile.
Disable – Click it to type the MAC address manually for
such profile.
Specify the MAC address for such profile. In default, the
system will determine it automatically.
There are several connection modes for you to specify for
IPv4 protocol type. Each mode will bring up different web
page.
The DMZ protocol is available for WAN4 profile only.
Determine such profile will be used for.
77