Available parameters are listed as follows:
Item
Profile
Enable
Protocol
Address Type
Subnet
Vigor3900 Series User's Guide
Description
Type the name of the rule.
Check this box to enable such profile.
Choose a protocol (ALL, TCP, UDP, ICMP, FTP, TFTP,
HTTP, SMTP, POP3, TCP/UDP) for such rule applied to
load balance. All is the default setting.
Choose the address type (Subnet or Object) for such rule.
Each type will bring different settings for configuration.
Source IP Address - Type a WAN IP address here as the
source IP address for such rule.
– click the icon to clear the IP setting.
Source Mask - Use the drop down list on the right to choose
a suitable mask for the source.
Destination IP Address - Type a WAN IP address here as
the destination IP address for such rule.
– click the icon to clear the IP setting.
Destination Mask- Use the drop down list on the right to
95