Draytek vigor3900 User Manual page 118

Refresh
Interface
Enable
Duplex
Speed
flow_control
Note
S t a t u s o f t h e S w i t c
S t a t u s o f t h e S w i t
This page provides information about speed, duplex, port connection (UP or Down) for the
WAN ports.
Available parameters are listed as follows:
Item
Refresh
Auto Refresh
Interface
Status
Speed
Apply – Click it to save and exit the dialog.
Cancel – Click it to exit the dialog without saving anything.
Renew current web page.
Display the name of the WAN port on the router.
Display the status of the profile. False means disabled; True
means enabled.
Display the duplex used (full or half) by such profile.
Display the transmission rate (10M, 100M, 1000M or Auto)
of the date for such profile.
Display the status (enable or disable) of such function.
Display addition information for such interface.
h
c h
Description
Renew current web page.
Specify the interval of refresh time to obtain the latest status.
The information will update immediately when the Refresh
button is clicked.
Display the physical port of the WAN interface.
Display if the port connection for WAN interface is linked or
not. Up means the network is connected; Down means the
network is not connected.
Display the transmission rate (10M, 100M, 1000M or Auto)
110 Vigor3900 Series User's Guide