Draytek vigor3900 User Manual page 104

Object
Load Balance Pool
/WAN Profile
Failover to the
Default Route
Failback
Apply
Cancel
choose a suitable mask for the destination.
Source IP Object – Use the drop down list to choose one of
the source IP objects for such rule profile.
Source IP Group –Use the drop down list to choose one of
the source IP group for such rule profile.
Destination IP Object – Use the drop down list to choose
one of the destination IP objects for such rule profile.
Destination IP Group - Use the drop down list to choose
one of the destination IP group for such rule profile.
Choose one of the profiles to be used by such rule. In which,
wan1 to wan5 profiles are configured in default. In addition,
profiles configured in WAN>>Load Balance Policy>> Pool
page also will be displayed here.
To have user-defined WAN profile, please refer to
WAN<<General Setup for detailed information.
When the specified interface disconnects due to some reason,
the router can use the default route to perform data
transmission.
Enable – Click it to enable such function.
Disable – Click it to disable such function.
When the specified interface re-connects, the traffic via other
interface will be interrupted immediately. The router will use
the specified interface for data transmission again.
Enable – Click it to enable such function.
Disable – Click it to disable such function.
Click it to save the configuration.
Click it to return to the factory setting.
96 Vigor3900 Series User's Guide