Draytek vigor3900 User Manual page 285

Type
VPN Settings Via
Profile Name
Next
Cancel
3. Click Create New VPN Profile and type the name of the profile. Click Next to get into
next page. Note that if you choose PPTP as the Type in Step 2, you will see the page
as below:
Item
Profile
Enable
PPTP User Name
Local IP / Subnet
Mask
Vigor3900 Series User's Guide
Specify which protocol (PPTP or IPSec) will be used for
such VPN profile.
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Type a new name for such profile.
Go to next page.
Cancel the configuration and return to the home page of such
function.
Description
Display the name of the profile.
Check this box to enable such profile.
Choose a user for authentication in PPTP connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Type the IP address and subnet mask of local host.
277