Draytek vigor3900 User Manual page 357

Mode
general target
source target
Apply
Cancel
4. Enter all the settings and click Apply.
5. A bandwidth limit profile has been created.
Vigor3900 Series User's Guide
cannot be saved.
Select Each to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX
limit fields; select Shared to make all the IPs within the
range of Start IP and End IP share the speed defined in TX
limit and RX limit fields.
Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
Time Group - Click the triangle icon
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
new time group profile.
Source IP Object - Click the triangle icon
profile selection box. Choose one or more IP object profiles
from the drop down list. The selected profile will be treated
as source target. You can click
object profile.
Source IP Group - Click the triangle icon
profile selection box. Choose one or more IP group profiles
from the drop down list. The selected profile will be treated
as source target. You can click
group profile.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
349
to display the
to create another
to display the
to create another
to display the
to create another new IP
to display the
to create another new IP