Item
Source Port End
Destination Port
Start
Destination Port
End
Apply
Cancel
4.
Enter all the settings and click Apply.
5.
A new Service Type Object profile has been created.
Description
Type a port number (0 – 65535) as the starting source port.
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending source
port.
It is available for TCP/UDP protocol. It can be ignored for
ICMP.
Type a port number (0 – 65535) as the starting destination
port.
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending
destination port.
Click it to save the configuration.
Click it to exit the dialog without saving anything.
192
Vigor3900 Series User's Guide