Draytek vigor3900 User Manual page 286

Remote IP / Subnet
Mask
If you choose IPSec as the Type in Step 1, you will get the following page:
Available parameters are listed as follows:
Item
Profile
Enable
WAN Profile
Local IP/Subnet
Mask
Local Next Hop
Remote Host
Remote IP / Subnet
Mask
More Remote
Subnet
Auth Type
Certificate
Preshared Key
Type the LAN IP address and LAN subnet mask for the
remote host.
Description
Display the name of the VPN profile.
Check this box to enable such profile.
Choose a WAN profile to be used by such profile.
Type the IP address and subnet mask of local host.
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Type the WAN IP address for the remote host.
Type the LAN IP address and LAN subnet mask for the
remote host.
Add more remote subnet in this field if required.
The authentication to be used by Pre-Shared Key or RSA
Signature. Choose PSK or RSA for such profile.
Choose a local certificate from the drop down list if RSA is
selected as Auth Type.
Type a pre-shared key for authentication if PSK is selected
as Auth Type.
278 Vigor3900 Series User's Guide