Step 2 - Configuring The Selected Protocol - Draytek vigor3900 User Manual

2 . 2 . 2 S t e p 2 - C
2 . 2 . 2 S t e p 2 - C
This page will be changed according to the IPv4 Protocol Type selected on last page.
I f S t a t i c
I f S t a t i c
If Static is selected, the following screen will appear. You can manually assign a static IP
address to the WAN interface and complete the configuration by applying the settings.
Available parameters are listed as follows:
Item
IP Address
Subnet Mask
Gateway IP Address
Vigor3900 Series User's Guide
o n f i g u r i n g t h e S e l
o n f i g u r i n g t h e S e l
i s s e l e c t e d
i s s e l e c t e d
Description
Type a public IP address for such WAN profile.
Choose the static mask from the drop down list.
Type a public gateway address for such WAN profile.
with it.
e c t e d P r o t o c o l
e c t e d P r o t o c o l
- click it to remove the IP address if you are not satisfied
11