Introduction; List Of Standard Functions (Not Programmable); List Of Basic Functions (Programmable) - Cobra BRIDGE 4100 Fitting Instructions Manual

INTRODUCTION

This manual contains all the information necessary to install the alarm system and to set it
up as required by the customer and / or by the local / insurance directive. Refer to the user
manual for a description of each function. You should indicate the program you have set in
the user manual.

LIST OF STANDARD FUNCTIONS (NOT PROGRAMMABLE)

The main functions of the alarm are listed below. They cannot be activated / deactivated or
customized.
• Remote arming / disarming via dynamic code radio controls.
• Volumetric protection of the vehicle's interior by ultrasonic sensor not requiring sensitivity
adjustment.
• Perimetric protection, 23 s after the alarm has been armed, the siren sounds if a door bonnet
or boot are opened.
• Protection of start attempts. With the alarm connected the engine is blocked and a start
attempt generates an alarm.
• When the alarm is triggered the siren sounds for 30 s at more than 115 dB (@ 1 m) and the
turn indicators flash.
• Original central locking command for doors and boot.
• LED indicating the system's status with alarm - record memory function.
• Safety circuit to prevent the system being armed when the engine is running.
• Panic alarm.
• Disablement of the sensor transducer and / or external sensor.
• Self - learning radio controls.
• Emergency override (PIN code).
• Wire cutting protection.
• Garage function.

LIST OF BASIC FUNCTIONS (PROGRAMMABLE)

These are functions that need to be programmed to suit the vehicle model and the alarm
operating modes required. Refer to the BASIC FUNCTIONS TABLE on pages 2 and 3 of the
programming tables.
• Central locking time.
• Controlled window winding (comfort).
• Doors / bonnet / boot open signal.
• Arming / disarming blinker.
• Automatic alarm arming.
• Automatic immobiliser arming.
• Immobiliser alarm.
Fitting instructions - BRIDGE 4100
06DE2143E.pmd 19
19
07/02/2008, 15.15