Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Cobra AK4169
Summary of Contents for Cobra AK4169
- Page 1 Vehicle Security System AK4169 / AK4218 Owner’s Manual...
- Page 2 Always keep the owner’s manual in the vehicle Dear Customer, Congratulations on your purchase of this Cobra vehicle security system which has been designed and manufactured to comply with the highest automotive standards utilising the latest technology for total reliability.
-
Page 3: Table Of Contents
Content: Page: INTRODUCTION.......................3 1. PERSONAL PIN CODE ..................4 2. ARM / DISARM ....................5 3. FEATURES .......................10 4. CAR FINDER ....................14 5. TROUBLESHOOTING ..................15 6. GLOSSARY ......................16 7. TECHNICAL SPECIFICATION ................17... -
Page 4: Introduction
Original Toyota key remote (Alarms: AK4218, ACS71-89020, ACS71-89020-CS & ACS71- 75030) Alarm (Cobra) remote control (Alarms: AK4169, ACS71-89030 & ACS71-89030-CS) To programme extra remotes for either alarm systems, please contact your nearest Toyota or Cobra dealer. -
Page 5: Personal Pin Code
You should keep this card always with you. Do not leave it the vehicle. If you have lost or want to change the PIN code, please contact your nearest Cobra or Toyota dealer. To enter the PIN code Press the button on the LED push button the number of times that corresponds to the first digit of the PIN code (press with a maximum of 1.5... -
Page 6: Arm / Disarm
2. Arm / Disarm Unlock button Lock button (AK4218, ACS71-89020, (AK4169, ACS71-89030, ACS71-89030-CS) ACS71-8920-CS & ACS71-75030) The alarm system will be armed when the vehicle is Locked and disarmed when the vehicle is unlocked using the remote control. 2.1. To ARM the alarm system... -
Page 7: To Disarm The Alarm System
Press the OE key remote unlock button once (AK4218, ACS71-89020, ACS71-89020-CS, ACS71-75030), the siren will stop and the system will be disarmed. Press the alarm (Cobra) remote unlock button twice (AK4169, ACS71-89030, ACS71- 89030-CS), the siren will stop (1 press) and the system will be disarmed (after the 2 press). - Page 8 2.4. Arm without the intrusion sensor If the vehicle is to be locked with someone inside (passenger, children or a pet), or if you want to leave a window partially open, then the intrusion sensor must be deactivated (by- passed) as follows: Hazard light Alarm status light Activation steps...
- Page 9 2.5. Arm without the optional sensor For example, if the system has an inclination (level) or PIR (canopy protection) sensor and you want to deactivate (by-pass) the sensor while travelling on a boat, train or leave a pet in the vehicle. If the alarm system is equipped with an optional sensor, it can be by-passed as follows: Hazard light Alarm status light...
- Page 10 2.7. Alarm status light (LED) The status LED is used to provide information to the user during normal operation and as well as a diagnostic tool. Condition Alarm status light (LED) Disarm state LED Off Pre-arm state (30 sec arming time) LED On Armed state LED flashes (at a steady rate)
-
Page 11: Features
3. Features As well as the alarm functions, some extra features are available which can be activated / deactivated. To activate or deactivate any of them please contact your Cobra or Toyota dealer. 3.1. Door ajar warning This feature is enabled by default. If any door or boot is not fully closed when the remote lock button is pressed, the system will sound (chirp) 10 times. -
Page 12: Passive Arming
The alarm system will unlock all the doors when the ignition is turned OFF. 3.4. Passive arming This feature is disabled by default and can be enabled by your Cobra or Toyota dealer. Passive arming mode arms the alarm system automatically without the vehicle being locked. - Page 13 3.5. Vehicle finder This feature is enabled by default and can be disabled by your Cobra or Toyota dealer. Vehicle finder enables the user to manually flash the hazard lights 4 times to help locate the vehicle when the system is in the fully armed state.
-
Page 14: Garage Mode
The exit form garage will be confirmed by 5 hazard light flashes. 3.8. Arming chirp This option is disabled by default. To enable it, please contact you Cobra or Toyota dealer. If this feature is enabled, the system will chirp once when armed and twice when disarmed using the remote control. -
Page 15: Car Finder
4. Remote Control When the alarm (Cobra) remote control battery is low the remote LED flashes erratically or slowly when any button is pressed. Note: - If the remote battery is flat the system can be disarmed by entering your pin code using the override LED button (see chapter 1, PIN code). -
Page 16: Troubleshooting
/ siren failure. dealer to find the cause. Record the number of LED flashes Alarm went off while system 5 chirps and contact your Cobra or Toyota was armed. dealer. Door was incorrectly closed 2 chirps during last arming (only if arming chirps are disabled). -
Page 17: Glossary
Blinking slow Alarm system is armed. No arming Fuse blown. Check vehicle Dome 7.5A fuse. Alarm central unit (ACU) is Contact your Cobra or Toyota damaged or disconnected. dealer. Alarm wire harness is Contact your Cobra or Toyota damaged. dealer. -
Page 18: Technical Specification
7. Technical Specifications Nominal rated operating voltage: +12V DC Operating voltage range: +9 to +16V DC Maximum overvoltage: +24V DC per 1 minute Maximum reverse voltage: -18V DC per 1 minute - Disarm state <0.5 mA (+12V DC) Current consumption - Arm state <4.5 mA (+12V DC) (max values at 23°C):... - Page 19 Part No. OMVSS1 Issued: 29/05/2012...