Troubleshooting - Breville BOV800XL Instruction Booklet

TROUBLESHOOTING

pOSSIBLE pROBLEM
Oven will not switch
"ON"
I would like to have
the oven LCD default
settings back
The LCD display light
has gone out
The pizza does not
cook evenly
The Magnetic
Auto-Rack Eject comes
out too far when I open
the door
I cannot select the
FROZEN FOODS button
48
EASY SOLUTION
• Check that the power plug is securely inserted
into the outlet
• Insert the power plug into an independent outlet
• Insert the power plug into a different outlet
• Reset the circuit breaker if necessary
• The oven will remember the last setting used for
each function unless you remove the plug from
the wall outlet.
• To restore the oven's default settings for each
function, remove the plug from the wall outlet.
Wait 5 seconds, then plug back in.
• The oven goes into standby mode if not used
for 10 minutes. When in standby mode, the LCD
screen will cease to illuminate, however all
function options will still be visible.
• To re-activate the oven out of standby mode,
press the START/CANCEL button on the control
panel, or turn any dial. The LCD screen will
re-illuminate.
• Some large pizzas may brown unevenly in com-
pact ovens. Open the oven door half way through
the cooking time and turn the pizza 90 degrees
for more even browning.
• Always open the door slowly and in a controlled
manner when the wire rack is inserted into this
rack height position to prevent the wire rack from
ejecting too quickly.
• The FROZEN FOODS button is only selectable
during the TOAST, BAGEL, PIZZA and COOKIE
functions.