OpERATING YOUR BREVILLE SMART OVEN™
a) The warming temperature is dis-
played as the top figure on the LCD
screen.
Turn the TEMPERATURE dial to adjust
the warming temperature in 10°F
increments, from 120°F to a maximum
of 450°F (or in the Celsius mode, 5°C
increments, from 50°C to a maximum
230°C).
b) The warming time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the baking
time in one minute increments up to
1 hour, and in 5 minute increments
between 1 and 2 hours
6.
Press the START/CANCEL button to
activate this setting. The button surround
will illuminate red and the oven alert will
sound.
7.
The timer will be displayed and begin to
count down in one minute increments.
The temperature and time can be
adjusted during the warming cycle by
turning the corresponding
TEMPERATURE and TIME dial.
8.
At the end of the warming cycle, the
oven alert will sound three times and the
START/CANCEL button surround will
cease to illuminate.
THE OUTER SURFACE OF THE
!
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
40
9.
The warming cycle can be stopped at
any time by pressing the START/
CANCEL button. This will cancel the
cycle and the button surround
illumination will go out.