Breville BOV800XL Instruction Booklet page 20

OpERATING YOUR BREVILLE SMART OVEN™
For example, raisin toast, white
light-textured breads or thinly sliced bread
may require a lighter setting, whilst heavier
textured rye, whole wheat or fresh breads
may require a darker setting.
b) The number of slices is displayed as
the bottom figure on the LCD screen.
Turn the TIME dial to the left to reduce
the number of slices, or to the right
to increase the number of slices. The
number of slices range from '1' to '6'.
NOTE:
Your customized TOAST browning
setting and number of slices will
remain in the memory of the oven
until you change them or unplug the
oven from the wall outlet. When the
oven is plugged back into the wall
outlet, the TOAST function will
automatically return to the preset
browning setting '4' and preset
number of slices '4'.
6. Press the START/CANCEL button to
activate this setting. The button surround
will illuminate red and the oven alert will
sound.
7. The timer will be displayed and begin to
count down. The time can be adjusted
during the toasting cycle by turning the
TIME dial.
PRESS
20
NOTE:
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
During the toasting cycle,
condensation may form on the oven
door and steam may be emitted.
This is normal. Condensation
and steam occur as a result
of the moisture content of the
bread. Freshly baked and frozen
breads generally produce more
condensation.
8. At the end of the toasting cycle, the
oven alert will sound three times and the
START/CANCEL button surround will
cease to illuminate.
THE OUTER SURFACE OF THE
!
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
9. The toasting cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle and the
button surround illumination will go out.