Siemens SINAMICS S120 Commissioning Manual page 86

Commissioning
2.3 Creating a project in the STARTER commissioning tool
What?
2. Add individual drive
3 Configure the drive unit
84
1. Double-click in the project tree on "Insert single drive unit".
The following settings are pre-assigned:
– Device type: CU320-2 PN
– Version: 4.5 or higher
– Online access: IP
– Address: 169.254.11.22
2. If necessary, correct these settings.
Once you have created the project, you have to configure the drive unit. Some examples
are provided in the following Chapters.
How?
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Comment
Information about the bus
address:
The PROFINET address
of the Control Unit must
not be set for initial
commissioning.
When delivered, the
TCP/IP address of the
Control Unit is set to
169.254.11.22. The
address can be
correspondingly changed
to meet individual
requirements.
Commissioning Manual