Siemens SINAMICS S120 Commissioning Manual page 182

Commissioning
2.13 Commissioning SIMOTICS 1FW6 built-in torque motors
Configuring the motor holding brake
If a motor holding brake is being used, configure it in the following window.
Figure 2-48
Encoder data
1. Note the data of the encoder manufacturer and the information in Chapter "Selecting and
180
Screen form for configuring a motor holding brake
configuring encoders (Page 140)" in this manual.
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Commissioning Manual