Machine Data Fundamentals - Siemens SINUMERIK 840D sl Commissioning Manual

Overview of machine and setting data
The table below lists the areas for machine and setting data. The List Manual contains a
detailed description.
Table 15-4
Range
from 2 to 9977
from 9000 to 9999
from 10000 to 18999
from 19000 to 19999
from 20000 to 28999
from 29000 to 29999
from 30000 to 38999
from 39000 to 39999
from 41000 to 41999
from 42000 to 42999
from 43000 to 43999
from 51000 to 61999
from 62000 to 62999
from 63000 to 63999
See also
Overview Commissioning NCK (Page 101)
15.5.1

Machine data fundamentals

Introduction
Machine and setting data are parameterized via:
● Number and identifier
● Activation
● Protection levels
● Unit
● Default value
● Value range (minimum and maximum)
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
Overview of machine and setting data
Name
Machine data for drives
Operator panel machine data
General machine data
Reserved
Channelspecific machine data
Reserved
Axisspecific machine data
Reserved
General setting data
Channelspecific setting data
Axisspecific setting data
General machine data for compile cycles
Channel-specific machine data for compile cycles
Axis-specific machine data for compile cycles
Fundamentals
15.5 Machine and setting data
311