Transferring License Information For A Control Image (Offline) To A Control System (Online) - Siemens SINUMERIK 840D sl Commissioning Manual

Licensing
14.9 Assigning via Automation License Manager
14.9.9 Transferring license information for a control image (offline) to a control system
(online)
Background
It is essential to transfer the license information for a control image (offline) to a control
system (online), i.e. the hardware for a SINUMERIK control, in the following situations:
● The computer (PC/PG) on which the Automation License Manager is installed is not
● After a service call, the license information should be transferred from an archive file to a
Requirements
The following conditions must met for transmission of a control image (offline) to the control
system (online):
● The Automation License Manager must be communicating with the control system.
● The hardware serial number of the control image (offline) and the control system (online)
Procedure using drag and drop
Perform the following steps to transfer a control image (offline) to the control system (online)
by drag-and-drop:
1. In the navigation area of the Automation License Manager, open:
Technology folder:
system (online)
2. In the navigation area of the Automation License Manager, open:
Technology folder:
Choose the control image (offline)
3. Select any line from the license information displayed in the object area by clicking with
the left mouse button.
4. Drag the selected line to the control system (online)
Procedure using menu commands
Perform the following actions to transfer a control image (offline) to the control system
(online) using menu command: "Download to target system":
1. In the navigation area of the Automation License Manager, open:
Technology folder
choose the control image (offline)
2. Select the menu command: License Key > Download to target system
286
simultaneously connected to the Internet and the control system. License information is
initially only updated based on a control image (offline). The computer on which the
Automation License Manager is running is then disconnected from the Internet and
connected to the relevant SINUMERIK control system to transfer the license information.
SINUMERIK control system.
must be identical.
"SINUMERIK online" > Control folder
by clicking with the left mouse button.
SINUMERIK offline > storage folder:
"SINUMERIK offline" > storage folder:
by clicking with the left mouse button.
by clicking with the left mouse button.
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
and choose the control
> control folder
release the mouse button.
> control folder:
IBN CNC: NCK, PLC, drive
.
and