Table 10-1 Resolutions: Machine Data - Siemens SINUMERIK 804D sl Commissioning Manual

Display resolution
In MD9004 DISPLAY_RESOLUTION (display resolution), you can set the number of decimal
places after the decimal point for the position values on the operator panel.
Input and display limit values
Limitation of the input values depends on the display features and on the input options on
the operator panel. The limit is ten digits plus comma and sign.
Example of programming in the
All the linear axes of a machine are to be programmed and traversed within the range of
values 0.1 to 1000 mm.
In order to position accurately to 0.1 μm, the computational resolution must be set to ≥ 10
incr./mm.
MD10200 INT_INCR_PER_MM = 10000 [incr./mm]:
Example of related parts program:
N20 G0 X 10000 Y 10000
;Axes move to position X=10000 mm, Y=10000 mm
N25 G0 X 50002 Y 20003
;Axes move to position X=50002 mm, Y=20003 mm
Machine data
Table 10-1 Resolutions: Machine data
Number Name of identifier
General ($MN_ ... )
9004 DISPLAY_RESOLUTION
9011 DISPLAY_RESOLUTION_INCH
10200 INT_INCR_PER_MM
10210 INT_INCR_PER_DEG
Literature
Function Manual Basic Functions; Velocities, traversing ranges, accuracy: Input/display
resolution, computational resolution
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
/ - μm range:
1
10
Name / remarks
Display resolution
Display resolution for INCH system of
measurement
Computational resolution for linear positions
Computational resolution for angular positions
NCK start-up
10.2 System data
4
Reference
G2
G2
G2
G2
99