Appendix
A.3 Publication-specific information
accurately and with a good dynamic response.
Two vector control types exist:
Frequency control (–> "Sensorless Vector Control") and speed-torque control with speed
feedback (–> "Sensor").
Status Word
Bit-coded -> "Process data" word, transmitted by -> "PROFIdrive" at cyclic intervals to
control the drive states.
A.3
Publication-specific information
A.3.1
Correction sheet - fax template
Should you come across any printing errors when reading this publication, please notify us
on this sheet. Suggestions for improvement are also welcome.
312
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0