Siemens SINUMERIK 804D sl Commissioning Manual page 49

The interface of socket X120 is used for the current commissioning of the internal HMI. The
IP address must be changed.
1. For socket X120, enter the IP address "192.168.214.1" and the Subnet screen form
2. Create the Ethernet interface using "New" and then "OK".
3. Click on "OK" twice.
Next, specify the properties for the integrated PROFIBUS.
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
"255.255.255.0".
PLC commissioning
7.1 Creating a SIMATIC S7 project
49