Transferring License Information For A Control Image (Offline) To A Control System (Online) - Siemens SINUMERIK 804D sl Commissioning Manual

14.9.9 Transferring license information for a control image (offline) to a control system
(online)
Background
It is essential to transfer the license information for a control image (offline) to a control
system (online), i.e. the hardware for a SINUMERIK control, for the following reasons:
• The computer (PC/PG) on which the Automation License Manager is installed is not
• After a service call, the license information should be transferred from an archive file to a
Requirements
The following conditions must be met before you can transfer a control image (offline) to the
hardware:
• The Automation License Manager must be communicating with the control system.
• The hardware serial number of the control image (offline) and the control system (online)
Procedure using drag and drop
Perform the following actions to transfer a control image (offline) to the hardware using drag
and drop:
1. Open the "online" control system file in the navigation area of the Automation License
2. Select any line from the license information displayed in the object area.
3. Drag the selected line to the control system (online) release the mouse key.
Procedure using menu commands
Perform the following actions to transfer a control image (offline) to the hardware using menu
command: "Download to target system":
1. Open the "online" control system file in the navigation area of the Automation License
2. To transfer the control image (offline) to the hardware, select menu command: License
Result
The license information for the hardware is now identical to the information for the control
image (offline), including the License Key.
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
simultaneously connected to the Internet and the control system. License information is
initially only updated based on a control image (offline). The computer on which the
Automation License Manager is running is then disconnected from the Internet and
connected to the relevant SINUMERIK control system to transfer the license information.
SINUMERIK control system.
must be identical.
Manager and select the control image (offline).
Manager and select the control image (offline).
Key > Download to target system
14.9 Assigning via Automation License Manager
Licensing
247