Configuring Preposition Tours; Programming The Inactivity Operation - Bosch MIC612 Installation Manual

MIC612 Thermal Camera
To clear a character from a title:
1.
2.
3.
4.
To save a title:
1.
2.
9.4

Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a series of preset or saved shots.
The MIC612 has one (1) standard preset tour and one (1) customized preset tour. Tour 1 is a
standard tour that moves the camera through a series of shots in the sequence that they were
set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour by
inserting and deleting scenes.
To start Preposition Tour 1:
1.
2.
To stop a Preposition Tour:

To add or remove scenes to Preposition Tour 1:
1.
2.
To start custom Preposition Tour 2:

To edit a custom Preposition Tour 2:
1.
2.
To change the dwell period of a tour:
1.
2.
9.5

Programming the Inactivity Operation

You can program the MIC612 to change its operating mode automatically after a period of
inactivity.
To access the Inactivity mode (locked command):
1.
2.
3.
Bosch Security Systems, Inc.
Use the joystick to highlight the Clear OR Position Character prompt.
Move the joystick left or right until the cursor is below the title character that you need to
clear.
Press Focus/Iris to clear the character.
Move the joystick up to bring the cursor back into the character palette.
Use the joystick to highlight the Exit prompt.
Press Focus/Iris to save the title.
Set a series of preset shots in the order that you want the MIC612 to cycle through.
Press ON-8-ENTER to start the tour. The tour then cycles through the series of shots until
it is stopped.
Press OFF-8-ENTER or move the joystick to stop either type of tour.
Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.
Use the Focus/Iris buttons to add or remove the selected scene from the tour.
Press ON-7-ENTER to start a tour. The tour cycles through the series of shots (in the
order that they were defined) until it is stopped.
Press SET-900-ENTER to access the Add/Remove Menu.
Press the Focus/Iris buttons to add or remove the selected scene.
Press ON-15-ENTER to access the Tour Period Menu.
Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.
Press OFF-90-ENTER to turn off the command lock.
Press ON-9-ENTER to access the Inactivity Mode Menu.
Select one of the following choices:
– Return to Scene 1: Returns the camera position to Shot 1.
– Recall Previous Aux: Returns the camera to the previous operating mode, such as a
Preposition Tour.
Installation Manual
Common User Commands | en
F.01U.249.416 | 1.1 | 2012.03
57