About The Mic Shielded Composite Cable; About The Video Connection; About Alarm Inputs And Outputs - Bosch MIC612 Installation Manual

16 en | Installation Overview
3.3

About the MIC Shielded Composite Cable

MIC shielded composite cables are 2-conductor cables of various lengths (and gauges ranging
from 14 - 18) that provide all power, video, and telemetry connections between the MIC PSU
and the MIC camera. The cables are pre-made with a female-terminated 14-pin connector at
one end for attachment to the male connector installed into the base of the camera. The other
end of the cables has free (non-terminated) wires for wiring into terminals in the MIC PSU.
Figure 3.6 Composite cable before connection to a MIC camera
Figure 3.7 Composite cable connected to a MIC camera
NOTICE!
Bosch does not recommend using the composite cable for distances greater than 25 m
between the MIC camera and the power supply.
3.4

About the Video Connection

The table below identifies the recommended cable types, maximum distance, and other
specifications for the coax video connection between the MIC camera and the power supply.
Cable Type
RG-59/U
RG-6/U
RG-11/U
Size
Shield
Central Conductor Standard copper center
3.5

About Alarm Inputs and Outputs

The table below identifies the number of alarm inputs and outputs available with and without
an 8-input alarm card installed in the MIC PSU.
Alarm Card
Installed?
Yes
No
F.01U.249.416 | 1.1 | 2012.03
Maximum Distance
300 m (1000 ft)
450 m (1500 ft)
600 m (2000 ft)
O.D. between 4.6 mm (0.181 in.) and 7.9 mm (0.312 in.)
Copper braid: 95%
Number of Number of
Alarm Inputs Alarm Outputs
8 2
1 0
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.