Common User Commands; Configuring Preposition Tours; Recording Tours - Bosch MIC612 Operation Manual

MIC612 Thermal Camera
11

Common User Commands

11.1

Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a series of preset or saved shots.
The MIC camera has one (1) standard preset tour and one (1) customized preset tour. Tour 1
is a standard tour that moves the camera through a series of shots in the sequence that they
were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour
by inserting and deleting scenes.
To start Preposition Tour 1:
1.
2.
To stop a Preposition Tour:
4
To add or remove scenes to Preposition Tour 1:
1.
2.
To start custom Preposition Tour 2:
4
To edit a custom Preposition Tour 2:
1.
2.
To change the dwell period of a tour:
1.
2.
11.2

Recording Tours

The MIC camera can make up to two (2) recorded tours. A Recorded Tour saves all manual
camera movements made during the recording, including its rate of pan, tilt and zoom speeds
and other lens setting changes.
To Record Tour A:
1.
2.
To play back Recorded Tour A:
1.
2.
To Record Tour B:
1.
2.
To play back Recorded Tour B:
1.
2.
Bosch Security Systems
Set a series of preset shots in the order that you want the MIC camera to cycle through.
Press ON-8-ENTER to start the tour. The tour then cycles through the series of shots until
it is stopped.
Press OFF-8-ENTER or move the joystick to stop either type of tour.
Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.
Use the Focus/Iris buttons to add or remove the selected scene from the tour.
Press ON-7-ENTER to start a tour. The tour cycles through the series of shots (in the
order that they were defined) until it is stopped.
Press SET-900-ENTER to access the Add/Remove Menu.
Press the Focus/Iris buttons to add or remove the selected scene.
Press ON-15-ENTER to access the Tour Period Menu.
Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.
Press ON-100-ENTER to start recording a tour.
Press OFF-100-ENTER to stop recording.
Press ON-50-ENTER to begin continuous playback.
Press OFF-50-ENTER or move the joystick to stop playback.
Press ON-101-ENTER to start recording the tour.
Press OFF-101-ENTER to stop the tour.
Press ON-52-ENTER to begin continuous playback.
Press OFF-52-ENTER or move the joystick to stop playback.
Operation Manual
Common User Commands | en
2016.03 | 2.1 | F.01U.249.416
73