Bosch MIC612 Installation Manual page 50

50 en | On-Screen Display (OSD) Menus (Bosch Protocol)
Option
Off
Ascending ramp A test pattern appears in the analog and digital data channels, to
Vertical
Color bars
Total Time On
Displays the total time that the video has been on.
Alarm Status Submenu
This menu displays the status of the alarm inputs and outputs. It appears differently,
depending on the Multi-Alarm setting.
Exit...
Alarm Input 1
Alarm Input 2
Alarm Input 3
Alarm Input 4
Alarm Input 5
Alarm Input 6
Alarm Input 7
Alarm Input 8
Alarm Output 1
Focus / Iris: Save and Exit
Alarm Input 1...8
Displays the status of alarm inputs 1 through 7. Options: High, Low, Open (Normally Open),
Closed (Normally Closed.
Alarm Output
Displays the status of the alarm output.
F.01U.249.416 | 1.1 | 2012.03
Description
(Default setting) No test pattern is available.
allow you verify the output of the digital data channel.
The figure below is a horizontal slice of the complete image; the
pattern repeats 19 times in the complete image.
When displayed on an analog video monitor, and if the AGC mode
is not set to the default value, the pattern may appear differently
than shown here.
Figure 6.1 Slice of complete image (320 x 256 or 640 × 512)
– 1: (0,0) = 0
– 2: (639,0) = 639
– 3: (25,408) (320 models)/(383,25) (640 models) = 16383
– 4: (25,409) (320 models)/(384,25) (604 models) = 0
Alarm Status
Open
Open
Open
Open
Open
Open
Open
Open
Open
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.