Diagnostics Menu - Bosch MIC612 Installation Manual

48 en | On-Screen Display (OSD) Menus (Bosch Protocol)
6.9

Diagnostics Menu

The Diagnostics menu contains a list of diagnostic tools and events. Most of these menu
items are display items only; you cannot select different values to change.
Exit...
Alarm Status...
BIST...
Internal Temp:
High Temp Events:
Highest Temp
Low Temp Events:
Lowest Temp:
Internal Humidity
Humidity Events
Security Access:
CTFID Access:
Restart Events:
Power-up Events:
Low-Volt Events:
Video Loss Events:
Total Time On
Thermal Camera Test Pattern On/Off
Diagnostic Events
Alarm Status
Enters the Alarm Status menu and displays the real time status of alarm inputs and outputs.
Alarm Inputs 1 to 8, Alarm Outputs 1 to 2 (Closed or Open)
BIST
Enters the Perform Built-in Self Tests menu. If confirmed, the BIST tests start and the results
are displayed.
YES to start test.
NO to exit the menu.
Typical results are:
Exit...
BIST
Data Flash:
FPGA:
Bilinx:
Internal Temp.
Displays the current temperature of the camera, in degress Fahrenheit and in degrees Celsius.
High Temp Events
Displays the number of times that the threshold of high temperature was exceeded.
Highest Temp
Displays the highest temperature reached, in degrees Fahrenheit and in degress Celsius.
F.01U.249.416 | 1.1 | 2012.03
Diagnostics
Deg F / Deg C
Deg F / Deg C
Deg F / Deg C
Deg F / Deg C
Deg F / Deg C
%
0
0
0
0
0
0
0hr 0min
Focus / Iris: Save and Exit
PASS
PASS
PASS
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.