Maintenance; On-Site Inspection; Cleaning And Servicing - Bosch MIC612 Installation Manual

64 en | Maintenance
12

Maintenance

The unit contains no user-serviceable parts. Maintenance and repair of this equipment shall
only be carried out by suitably trained personnel in accordance with the applicable code of
practice (for example, EN60097-19). In the event of failure, the unit should be removed from
site for repair.
To maintain the validity of the certification, only components supplied by Bosch Security
Systems shall be used.
12.1

On-site Inspection

It is recommended that the equipment be inspected on-site every six months to check
mounting bolts for tightness, security, and any signs of physical damage. Inspection of this
equipment shall only be carried out by suitably-trained personnel in accordance with the
applicable code of practice (for example, EN60097-17).
12.2

Cleaning and Servicing

1.
2.
3.
4.
5.
F.01U.249.416 | 1.1 | 2012.03
Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions
provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist
fluff-free cloth or leather shammy may also be used. Do not use any of the following on
the camera:
– liquid cleaners
– aerosol cleaners
– caustic cleaning products
– abrasive cleaning products
Moving - Disconnect the power before moving the unit. Move the unit with care.
Excessive force or shock may damage the unit.
For transportation, rotate the ball so that the window points toward the base. This will
protect the wiper and the windows during transit.
Damage requiring service - Unplug the unit from the main AC power source. Do not
attempt to service this unit yourself. Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer servicing to qualified service personnel when
any damage to the equipment has occurred, such as:
– the power supply cord or plug is damaged;
– liquid has been spilled in the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating
instructions.
Replacement parts - Ensure that the service technician uses replacement parts specified
by the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.
Installation Manual
MIC612 Thermal Camera
Bosch Security Systems, Inc.