Bosch MIC612 Installation Manual page 49

MIC612 Thermal Camera
Low Temp Events
Displays the number of times that the threshold of low temperature was exceeded.
Lowest Temp
Displays the lowest temperature reached, in degrees Fahrenheit and in degress Celsius.
Internal Humidity
Displays the percentage of humidity inside the camera housing.
Humidity Events
Displays the number of times that the threshold of the humidity inside the camera housing
was exceeded.
Security Access
Displays the number of times that the locked-command menu is unlocked.
CTFID Access
Displays the number of times that the Configuration Tool is accessed.
Restart Events
Displays the number of restart events.
Power Up Events
Displays the number of power up events.
Low Volt Events
Displays the number of times that the camera dropped below the acceptable voltage limit.
Video Loss Events
Displays the number of time that video was lost.
Thermal Camera Test Pattern
Activates the test pattern mode to verify electronics (the output of the digital data channel)
for the thermal camera.
NOTICE!
Before activating the test pattern, turn off the correction terms and set the AGC Mode to
Outdoor. This mode will not persist over a power cycle.
Bosch Security Systems, Inc.
On-Screen Display (OSD) Menus (Bosch Protocol) | en
Installation Manual
49
F.01U.249.416 | 1.1 | 2012.03