(8)
Release the harness out of 5 clamps, and
then disconnect the relay connector of the
paper holding arm motor.
(9)
Take off the belt of the buffer roller drive
motor.
(10) Disconnect the connector of the buffer roller
drive motor and release the harness out of
the clamp.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Relay
connector
Cramp
Buffer roller drive motor
Buffer roller drive motor
Connector
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 18
Cramp
Fig. 4-50
Belt
Fig. 4-51
Cramp
Fig. 4-52