Toshiba MJ-1104 Service Manual page 184

[J] Folding blade home position sensor (S35)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Disconnect the connector, and release the
latch, and then take off the folding blade
home position sensor.
[K] Side alignment home position sensor (S36)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 4 screws, and then take off the
upper safety cover.
(3) Move the alignment plates to the center.
(4) Disconnect the connector, and release the
latch, and then take off the side alignment
home position sensor.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Folding blade home position sensor
Side alignment home position sensor
Alignment plates
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 116
Stacker guide
Fig. 4-329
Stacker guide
Upper safety cover
Fig. 4-330
Stacker guide
Fig. 4-331